1 9

System M+ with Top Pivot 40mm

System M+ with Top Pivot 40mm

The System M+ gives you control over every part of the door movement for light and heavy pivot doors.


Adjustability for each pivot door

Fully adjustable door movement

Thanks to Damper Control, 30° Speed ​​​​Control and Latch Control, the movement of the System M+ is fully adjustable.

Proper closure

Latch Control ensures that doors with locks or latches always close correctly. Ideal for exterior pivot doors.

From small to large doors

The System M+ is suitable for light doors and heavy doors in a range of 80 kg to 500 kg in maximum design freedom.


System M+ for all pivot doors

This top hinge is a true all-rounder. Its ability to position the system 70mm from the side of the door reduces footprint while retaining beautiful, distinctive pivot door movement. This top pivot can be installed in any position between 70mm and the center of the door and is suitable for all FritsJurgens pivot systems.

Pivot point: Flexible from 70 mm

Top hinges: 70mm, Reversed and Cable Grommet


System M+ for maximum free widths

Thanks to the pivot point fixed at 40 mm, this top hinge makes the most of any space. The upper pivot is as close to the side of the door as possible. All available space is used and the free opening is as large as possible. In the open position, the pivoting door is also minimally present. This is ideal for situations where a standard door width must be retained. This top pivot is ADA compliant.

Pivot point: Fixed at 40mm
Top hinges: 40mm
Finishes: Stainless steel and black

System M+ comes in 7 different types , all designed specifically for the weight and dimensions of your pivot door. Find out which type you should choose for your pivot door.

Weight class A - E

The M+ Class A - E System is for the most common doors. These hinges are smaller than class F and G and the minimum door thickness is 40 mm.

Dimensions: 294.8 x 32 x 99.6mm
Weight: 2.6kg
Min. Door thickness: 40mm


Weight class F - G

The M+ class F and G system is for heavier doors. These hinges are also larger than those of class A - E, so the door must have a minimum thickness of 50 mm.

Dimensions: 308.2 x 42 x 112.7mm
Weight: 3.6kg
Min. Door thickness: 50mm

View full details

Latch Control

Provides the ability to adjust the pivot hinge to properly engage the door.

damper control

Ensures a smooth and graceful closing motion and protects your door from touching the wall (rear check).

30º Speed ​​Control

Allows you to determine the speed of the pivot door through the last part of the closing movement.

Components

  • Ceiling Plates

    The ceiling plate is installed into the ceiling, where the spindle of the top hinge fits snugly into the hole in the ceiling plate. The ceiling plate is available in two finishes: brushed stainless steel and black.

  • Top Hinge

    The top hinge is as close to the side of the door as possible. It uses a so-called pinhole connection, in which the spindle is attached to the top hinge and enters the hole in the ceiling plate when the door is attached.

    FritsJurgens offers two types of top hinges: Regular Top Hinge and Cable Grommet Top Hinge.

  • Lower Pivot

    The bottom pivot is the pivot mechanism and driver of the pivot door and is installed at the bottom of the door. Therefore, the pivot mechanism is virtually invisible. FritsJurgens lower pivots have a load capacity for pivot doors of up to 500 Kg.

  • Pavement Plates

    Each FritsJurgens paving slab is mounted 8 mm from the paving. This is sufficient for almost all floor types and allows FritsJurgens hinges to be combined with underfloor heating. Two longer and shortenable 30mm floor plate spindles are included with the rectangular floor plate designs.

    There are several floor tiles available for the System M+.

Take a look at System M+

Videos

Technical specifications

  • System M+ - Class AE

    System Specifications

    • Dimensions: 294.8 x 32 x 99.6mm
    • Weight: 2.6kg
    • Material: Stainless steel | Anodized aluminum
    • Corrosion resistant: EN 1670 - class 5 (standard: 0-5)

    Door Specifications

    • Door operation: One and Two ways
    • Weight capacity: Between 20 and 349 Kg
    • Min. door thickness: 40 mm
    • Door thickness: 400 to 5000 mm
    • Top space: 4 - 10 mm
    • Bottom space: 11mm
    • Locking positions: 90°, -90° and 0°

    Features

    • Free Swing: N/a
    • Damper Control: Yes
    • 30° Speed ​​Control: Yes
    • Latch Control: Yes

  • System M+ - Class FG

    System Specifications

    • Dimensions: 308.2 x 42 x 112.7mm
    • Weight: 3.6kg
    • Material: Stainless steel | Anodized aluminum
    • Corrosion resistant: EN 1670 - class 5 (standard: 0-5)

    Door Specifications

    • Door action: One and Two ways
    • Weight capacity: Between 350 and 500 Kg
    • Min. door thickness: 50 mm
    • Door thickness: 400 to 5000 mm
    • Locking positions: 90°, -90° and 0°

    Features

    • Free Swing: N/a
    • Damper Control: Yes
    • 30° Speed ​​Control: Yes
    • Latch Control: Yes

  • downloads

    Manual assembly

    Technical specifications

  • Settings card

Get your pivot hinge! Contact us to provide you with a solution

  • Warranty

    30 days to return your products *Review policies

  • Free shipping

    Fast and safe to all of Mexico on certain products

  • Quality and exclusivity

    Premium material and exclusive items

  • Easy and Safe Purchase

    Your online purchases and personal data are protected

  • Highest Offer

    More variety of products

1 5